The DIY Guide to Inspecting Your Own Roof and Keeping Your House Safe

    You don’t need to call in the pros in order to successfully inspect your own roof. You can save yourself some money and do just as good a job if you inspect your own roof. This is a maintenance job that can help you prevent damage to the structure of the home for many years down the road. Unfortunately, it is easy to overlook, and many homeowners do just that. You have to be more proactive than just doing an inspection just once a year. Here is what you need to do to inspect your roof and keep your house safe.

    Check the Flashings Regularly

    You’ll know flashings better as the metal pieces on your roof that cover any interruptions in the plane of the covering. These can be found around vent pipes, chimneys, and dormers, to name just a few locations. If you do spot faulty or bad flashings and identify damage, that’s a problem that should be fixed immediately. Faulty flashings can lead to melted snow actually getting inside the interior of your home. This can lead to infrastructure rot and even damage to the interior walls. You should call a roof contractor immediately to deal with faulty flashings.

    Watch Out for Granules

    Any asphalt roofing material will possess a granular surface, which is almost like fine gravel. As this asphalt gets older, it will become more brittle, and, as a result, these granules are going to start to come loose over time. Should you happen to spot a number of these granules in the gutters, it’s a safe bet that your roof isn’t aging well. In order to verify this problem, you should look for any bare spots in the asphalt shingles, indications of either warping or tearing, and the shingles curling up. Any of these signs warrant a call to your roof contractor.

    Inspect for Dry Rot

    Dry rot can occur if your covering has either wooden shingles or wooden shakes. It will also depend on the local climate of your residence. To make the proper determination, it helps to know the difference between wooden shingles and wooden shakes. Shakes will have one split face at minimum, and will be either straight or tapered. Shingles, on the other hand, will be both tapered and sawn. If at least a third of your shingles or shakes show signs of warping or dry rot, then it is time to replace the entire roof. Also, be sure never to walk on a wooden shingle or shake roof during the inspection. Use binoculars instead and stay on the ground.

    By ensuring that you check your roof for the above signs of damage, you can take strides toward protecting it and keeping your home safe. The thing about problems with the covering of your house is that they can eventually also affect the interior of your home. By doing regular inspections more than just once a year, you can save a good deal of money by catching roofing problems before they get out of control.

    Trackback from your site.

    Leave a Reply